Inspection Procedure

1. Reset the power window regulator motor (See SYSTEM DESCRIPTION  ).
2. Check if the power window AUTO UP/DOWN function operates normally.

   OK: 

   AUTO UP/DOWN function operates normally. 

NG: OTHER PROBLEM 

OK: Go to next step 

1. Check that the jam protection function operates normally (See ON-VEHICLE INSPECTION  ).

   HINT:

   The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.

NG: REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY 

OK: END