Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | P0115-P0118 (ECT sensor) P0120 - P0223, P2135 (TP sensor) P0125 (Insufficient ECT for closed loop) P0335 (CKP sensor) P0340 (CMP sensor) |
| Speed | Less than 2,000 rpm |
| Engine coolant temperature | 70°C (158°F) or more |
Mass Air Flow Meter Rationality (High Voltage):
MASS AIR FLOW METER RATIONALITY (HIGH VOLTAGE)
| Engine speed | Less than 2,000 rpm |
| Engine coolant temperature | 70°C (158°F) or higher |
| IAT sensor circuit | OK |
| ECT sensor circuit | OK |
| CKP sensor circuit | OK |
| TP sensor circuit | OK |
| Canister pressure sensor circuit | OK |
| EVAP leak detection pump | OK |
| EVAP vent valve | OK |
Mass Air Flow Meter Rationality (Low Voltage):
MASS AIR FLOW METER RATIONALITY (LOW VOLTAGE)
| Engine speed | More than 500 rpm |
| Fuel out | OFF |