Inspection Procedure
- CHECK OPERATION
- Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
OK:
Cassette tape is ejected.
NG: REPLACE TAPE PLAYER
OK: Go to Next Step
- Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
- CHECK CASSETTE TAPE
- Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
OK:
No problems with cassette tape.
NG: CASSETTE TAPE IS FAULTY
OK: Go to Next Step
- Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
- REPLACE CASSETTE TAPE
- Replace the cassette tape with a normal one and check that the malfunction disappears.
OK:
Malfunction disappears.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK: CASSETTE TAPE IS FAULTY
- Replace the cassette tape with a normal one and check that the malfunction disappears.