Park/Neutral Position Switch: Installation

INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
1. Install the park/neutral position switch with the bolt.
  Torque: 13 N*m (130 kgf*cm, 10 ft.*lbf)
2. Install a new lock washer and the nut.
  Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf)
  
  Fig 1: Identifying Lock Washer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Bend the claws on the lock washer to stake the nut.
4. Adjust the park/neutral position switch (See ADJUSTMENT ).
CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
INSTALL REAR ENGINE UNDER COVER ASSEMBLY
INSTALL NO.1 ENGINE UNDER COVER SUB-ASSEMBLY
INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
HINT:

(See INSPECTION )