VVT Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

DRAIN ENGINE COOLANT (See REPLACEMENT )
REMOVE V-BANK COVER (See REMOVAL )
DISCONNECT VENTILATION HOSE NO.2
REMOVE AIR CLEANER ASSEMBLY (See REMOVAL )
REMOVE VVT SENSOR
1. RH bank side VVT sensor.
  1. Disconnect the VVT sensor connector.
    
    Fig 1: Locating VVT Sensor Bolt
    Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  2. Remove the bolt and the VVT sensor.
2. LH bank side VVT sensor.
  1. Disconnect the water bypass hoses No. 4 and No. 5.
    
    Fig 2: Locating Water Bypass Hoses No. 4 And No. 5
    Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  2. Disconnect the VVT sensor connector.
  3. Remove the bolt and the VVT sensor.
    
    Fig 3: Locating VVT Sensor Bolt
    Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.