Typical Enabling Conditions
ALL:
TYPICAL ENABLING CONDITIONS
| Monitor will run whenever these DTCs are not present | P0115 - P0118 (ECT sensor) P0120 - P0223, P2135 (TP sensor) P0125 (insufficient ECT for closed loop) P0335 (CKP sensor) |
| Throttle position | 0.24 V or more |
| Engine | Running |
| Battery voltage | 10.5 V or more |
| Engine coolant temperature | 70°C (158°F) or more |
| IAT sensor circuit | Not detected |
| ECT sensor circuit | Not detected |
| CKP sensor circuit | Not detected |
| TP sensor circuit | Not detected |
| Canister pressure sensor circuit | Not detected |
| Leak detection pump fail | Not detected |
| Vent valve fail | Not detected |