DTC 62-78 DSP Error; DTC 63-78 DSP Error: Description
DSP ERROR
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| 62-78 | An error occurs during the decode process (MP3/WMA). | - |
| 63-78 | An error occurs during the decode process (MP3/WMA). | - |
HINT:
After the inspection is completed, clear the DTCs.
NOTE:
- These codes may be output even if there is no malfunction.
- If these codes are output frequently, replace the radio receiver.
- CLEAR DTC
- Clear the DTCs (See DTC CHECK / CLEAR ).
- RECHECK DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: REPLACE RADIO RECEIVER
OK: END
- Recheck for DTCs and check if the same trouble occurs again.