Typical Malfunction Thresholds

TYPICAL MALFUNCTION THRESHOLDS

Either of the following conditions is met:	Condition 1 or 2
Frequency that both of the following conditions (a) and (b) are met:	5 times
(a) Engine RPM - Target engine RPM	Less than -100 RPM, or more than 150 RPM
(b) Vehicle condition	Stop after vehicle was driven at 6.25 mph (10 km/h) or more
2. Frequency that both of the following conditions (a) and (b) are met:	Once
(a) Engine RPM - Target engine RPM	Less than -100 RPM, or more than 150 RPM
(b) IAC flow rate learning value	1.3 L/sec. or less, or 9.03 L/sec. or more