Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2006 >> Avalon XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System (3MZ-FE)) >> SFI System >> ECM Power Source Circuit >> Description

ECM Power Source Circuit: Description

WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is turned ON, battery voltage is applied to terminal IGSW of the ECM. The ECM "MREL" output signal causes current to flow to the coil, closing the contacts of the EFI relay (marked: EFI) and supplying power to terminal +B of the ECM.

If the ignition switch is turned OFF, the ECM holds the EFI relay ON for a maximum of 2 seconds to allow the initial setting of the throttle valve.

scientia non olet · About Mike's Workshop Manuals