Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2005 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Systems - Diagnostics >> Circuit Inspection >> Door Unlock Detection Switch Circuit >> Inspection Procedure

Inspection Procedure

  1. Check door unlock detection switch (See  INSPECTION  ). 
    1. NG: Replace door unlock detection switch. 
    2. OK: Go To Next Step. 
  2. Check for harness and connector between door unlock detection switch and passenger side J/B ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG: Repair or replace harness and connector. 
    2. OK: Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
scientia non olet · About Mike's Workshop Manuals