Engine Immobilizer System (W/Smart Entry System) - Diagnostics: Precaution
NOTICE FOR INITIALIZATION:
When disconnecting the cable from the negative (-) battery terminal, initialize the following system (s) after the cable is reconnected.
SYSTEM NAME AND PAGE NO. CHART
| System Name | Refer to |
|---|---|
| Power Window Control System | INITIALIZATION |
NOTICE FOR HYBRID SYSTEM ACTIVATION:
- When the warning lamp is illuminated or the battery has been disconnected and reconnected, pressing the power switch may not start the system on the first try. If so, press the power switch again.
- If the power switch is ON (IG), the battery is disconnected, and the key is not in the key slot or not within the smart key detection area during reconnection, DTC B2799 may be output.