Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2005 >> Land Cruiser >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Driver Door Control System - Diagnostics >> Circuit Inspection >> Jam Protection Limit/Pulse Switch Circuit On Rear Left Door >> Inspection Procedure

Inspection Procedure

  1. Check jam protection limit/pulse switch (See  INSPECTION  ). 
    1. NG: Replace power window motor. 
    2. OK: Go to next step. 
  2. Check wire harness and connector between power window motor and power window switch (See  HOW TO USE THE DIAGNOSTIC TABLE AND INSPECTION  ). 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Replace Power window switch. 
scientia non olet · About Mike's Workshop Manuals