Inspection Procedure
WARNING: This page is about a different car, the 2005 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- Check key unlock warning switch (See INSPECTION
).
- NG: Replace key unlock warning switch.
- OK: Go To Next Step.
- Check for harness and connector between key unlock warning switch and passenger side J/B ECU (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
).
- NG: Repair or replace harness and connector.
- OK: Proceed to next circuit inspection shown in problem symptoms table (See PROBLEM SYMPTOMS TABLE ).