Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Sequoia Limited, 4WD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Passenger Door Control System >> Circuit Inspection >> Power window switch circuit >> Inspection Procedures

Inspection Procedures

  1. Check the power window switch using TOYOTA hand-Held tester. 

    PREPARATION: 

    Connect the TOYOTA Hand-held tester to the DLC3.

    CHECK: 

    Check the power window switch using DATA LIST.

    OK: 

    Passenger side:

    Fig 1: Passenger Side Power Window Checking Table
    G02922022Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. OK: Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
    2. NG: Replace the passenger door ECU