Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Blower Unit >> Installation

Blower Unit: Installation

  1. INSTALL BLOWER UNIT 
    1. Install the blower unit with the 2 screws and 2 nuts.
      Fig 1: Installing Blower Unit With 2 Screws And 2 Nuts
      G02926875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the blower resistor, blower motor connectors and harness clamps to the blower unit.
    3. Connect the air inlet servomotor connector.
      Fig 2: Connecting Blower Resistor, Blower Motor Connectors & Harness Clamps
      G02926876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the glove compartment door reinforcement (supply part) with the 2 screws.
      5. Fig 3: Installing Glove Compartment Door Reinforcement
      G02926877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL GLOVE COMPARTMENT DOOR 
scientia non olet · About Mike's Workshop Manuals