Dismounting/Mounting Procedures
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
This vehicle IS NOT
equipped with tire pressure sensors mounted on the wheels.
NOTE:
Installed tires should be of the specified size. They should be of the same size and construction. If tires other than the specified size are used, or if tires of different sizes or constructions are mixed, the tire pressure warning system will not function properly.
NOTE:
This system requires initializing after changing tires or wheels, after rotating the tires, or when tire pressure warning light blinks twice every second. See INITIALIZING TIRE PRESSURE MONITOR SYSTEM under RESET PROCEDURES.