Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 971 (Power Liftgate System) >> Trim Panel >> Removal >> Removal - Lower

Removal - Lower

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release liftgate latch and open liftgate.
  2. Remove liftgate upper trim panel. .
  3. Remove two (2) upper screws attaching trim panel (Fig 1 ).
  4. Remove six (6) lower screws attaching trim panel.
  5. Remove liftgate trim panel from vehicle.
  6. Gently pull trim panel away from liftgate to disengage pins and grommets.
  7. Remove trim panel from vehicle.
    Fig 1: Removing Liftgate Lower Trim Panel
    G03571780Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About Mike's Workshop Manuals