Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 970 (Body - Interior) >> Rear View Mirror >> Installation

Rear View Mirror: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the mirror base at the support button and slide it downward onto the button (Figure).
  2. Tighten the set screw 1 N.m (15 in. lbs.) torque.
  3. If equipped, connect mirror wire connector(s).
scientia non olet · About Mike's Workshop Manuals