Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 954 (3.5L Engine (Service Information)) >> Oil Pressure Sensor/Switch >> Installation

Oil Pressure Sensor/Switch: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply Mopar(R) Thread Sealant to the switch threads.
  2. Install oil pressure switch to fitting (Figure ).
  3. Connect electrical connector.
  4. Lower vehicle.
  5. Start engine and check for leaks.
  6. Check engine oil level and adjust as neccessary.
scientia non olet · About Mike's Workshop Manuals