Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 950 (Wiper System & Washer System) >> Wipers/Washers >> Operation >> Rear Wiper/Washer Operating Modes >> Continuous Wipe Mode

Continuous Wipe Mode

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

When the On position of the control sleeve on the right (wiper) multi-function switch control stalk is selected, the multi-function switch circuitry directs a battery current signal to the rear wiper motor through the rear wiper motor control circuit, causing the rear wiper to cycle continuously at a fixed speed.