Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 941 (Heated Seat System) >> Heated Seat Module - 2ND Row Seats >> Removal

Heated Seat Module - 2ND Row Seats: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the 2nd row seat center console. Refer to REAR FLOOR CONSOLE for the procedure.
  3. Disconnect the wire harness connector from the heated seat module. Depress the connector retaining tab and pull straight apart.
  4. Remove the heated seat module retaining fasteners and remove.
scientia non olet · About Mike's Workshop Manuals