Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 941 (Heated Seat System) >> Driver Heated Seat Switch >> Installation

Driver Heated Seat Switch: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heated seat switch assembly.
  2. Connect the harness to the door module.
  3. Install the front door trim panel. Refer to TRIM PANEL for the procedure.
  4. Reconnect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals