Engine Coolant Temperature Sensor
WARNING: This page is about a different car, the 2004 Toyota RAV4, 2003 Toyota RAV4, and 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- Drain engine coolant. Remove ECT sensor. See ECT SENSOR LOCATIONS . Place ECT sensor and thermometer into a water bath.ECT SENSOR LOCATIONS
Application Sensor Location RAV4 Rear Of Engine, Below Air Cleaner Assembly - Measure resistance between terminal Nos. 1 and 2. See Fig 1. If resistance is not as specified, replace ECT sensor.
- Install NEW gasket on sensor, and install ECT sensor. Fill with engine coolant.