Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Lighting System - Diagnosis) >> Headlight Beam Level Control Ecu Communication Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HARNESS AND CONNECTOR 
    1. Check for open and short circuit in harness and connector between terminal FLO of skid control ECU and terminal SPDL of headlight beam level control ECU.
    2. Check for open and short circuit in harness and connector between terminal B2 of headlight beam level control ECU and terminal HDLV of passenger side J/B ECU.
    3. Check for open and short circuit in harness and terminal WNG of headlight beam level control ECU and terminal WNG of passenger side J/B ECU.
    1. NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 
    2. OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOM TABLE, SEE  PROBLEM SYMPTOMS TABLE  . 
scientia non olet · About Mike's Workshop Manuals