Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Door Lock Motor Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check door lock motor (See  INSPECTION  ). 
    1. NG : Replace door lock motor. 
    2. OK : Go to next step. 
  2. Check for harness and connector between door lock motor and passenger side J/B ECU. 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ).