Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Brake Fluid Level Warning Switch Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check brake fluid level warning switch (See  INSPECTION  ). 
    1. NG : Replace brake fluid level warning switch. 
    2. OK : Go to next step. 
  2. Check for harness and connector between brake fluid level warning switch and passenger side J/B ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ). 
scientia non olet · About Mike's Workshop Manuals