Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Anti-Lock/Vehicle Skid Control) >> Self-Diagnostic System >> Clearing Codes >> With Hand-Held Tester

With Hand-Held Tester

WARNING: This page is about a different car, the 2004 Lexus IS 300, 2003 Lexus IS 300, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the hand-held tester to the DLC3. See Figure. Turn the ignition switch ON.
  2. Turn the ignition ON.
  3. Operate the hand-held tester to erase the codes.
  4. Please refer to the hand-held tester operator's manual for further details.
scientia non olet · About Mike's Workshop Manuals