Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Anti-Lock/Vehicle Skid Control) >> Diagnosis & Testing >> Pre-Check

Diagnosis & Testing: Pre-Check

WARNING: This page is about a different car, the 2004 Lexus IS 300, 2003 Lexus IS 300, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that battery positive voltage is 10 to 14 volts.
  2. Release the parking brake pedal.
  3. Check the warning lights and indicator lights. When the ignition switch is turned ON, check that the ABS warning light, BRAKE warning light, VSC warning light, TRAC OFF indicator light and SLIP indicator light turn on for approximately 3 seconds. See Fig 1.
  4. If the ECU stores DTC, ABS warning light, VSC warning light TRAC OFF indicator light and BRAKE warning light are ON.
  5. If the indicator check result is not normal, see SYSTEM TESTING .
Fig 1: Identifying Warning Lights
G00195289Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002