Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Land Cruiser >> Repair and Diagnosis >> External Pages >> Different car >> Section 479 (Driver Door Control System - Diagnostics) >> Circuit Inspection >> Jam Protection Limit/Pulse Switch Circuit On Front RH Door >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2005 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check jam protection limit/pulse switch (See  INSPECTION  ). 
    1. NG: Replace power window motor. 
    2. OK: Go to next step. 
  2. Check wire harness and connector between power window motor and power window switch (See  HOW TO USE THE DIAGNOSTIC TABLE AND INSPECTION  ). 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Replace Power window switch. 
scientia non olet · About Mike's Workshop Manuals