Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (Power Window Control System) >> Removal And Installation >> Power Window Main Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power window main switch finisher and power window main switch (2) from the front door finisher (LH) using a suitable tool.
    • Disconnect the power window switch harness connector.
  2. Remove the power window main switch (1) screws using a suitable tool (A).
  3. Separate the power window main switch from the finisher (2).
    Fig 1: Removing Power Window Main Switch Screws Using Tool
    G05382409Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals