Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Corolla LE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Power Window Master Switch Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the power window master switch (See  INSPECTION  ). 
    1. NG : Replace the power window master switch. 
    2. OK : Go to next step. 
  2. Check wire harness and connector between power window master switch and body ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace wire harness or connector. 
    2. OK : Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
scientia non olet · About Mike's Workshop Manuals