Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2004 >> Corolla LE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Airbag Sensor Assembly Communication Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for open and short in wire harness and connector between body ECU and airbag sensor assembly (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace wire harness and connector. 
    2. OK : Go to next step. 
  2. Check the airbag sensor assembly (See  AIR BAG SENSOR ASSEMBLY  ). 
    1. NG : Replace the airbag sensor assembly. 
    2. OK : Replace the body ECU. 
scientia non olet · About Mike's Workshop Manuals