Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2003 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Systems - Diagnostics >> Circuit Inspection >> Brake Fluid Level Warning Switch Circuit >> Inspection Procedure

Inspection Procedure

  1. Check brake fluid level warning switch (See  INSPECTION  ). 

    NG: Replace brake fluid level warning switch. 

    OK: Go To Next Step. 

  2. Check for harness and connector between brake fluid level warning switch and passenger side J/B ECU (See page  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 

    NG: Repair or replace harness or connector. 

    OK Proceed to next circuit inspection shown in (See page  PROBLEM SYMPTOMS TABLE  ). 

scientia non olet · About Mike's Workshop Manuals