Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2003 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Front Suspension System) >> Removal & Installation >> Upper Control Arm >> Bushing Replacement

Bushing Replacement

WARNING: This page is about a different car, the 2004 Toyota Tundra, 2003 Toyota Tundra, and 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Using a chisel and hammer, pry up flange of bushing. Using Split Clamp (09613-26011) and press, remove bushing. Press in new rear bushing.

scientia non olet · About Mike's Workshop Manuals