Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2003 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Front Suspension System) >> Removal & Installation >> Lower Control Arm >> Bushing Replacement

Bushing Replacement

WARNING: This page is about a different car, the 2004 Toyota Tundra, 2003 Toyota Tundra, and 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Using a chisel and hammer, pry up flange of bushing. Using Split Clamp Plate (09613-26010) and press, press out bushing from lower control arms. Press in new bushings with adapter. DO NOT apply grease or oil to bushings.

scientia non olet · About Mike's Workshop Manuals