Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2003 >> Highlander Base, 3.0 F, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 841 (Engine Control System (Introduction)) >> Preparation >> Preparation >> Special Service Tool

Special Service Tool

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number
(Kent-Moore No.)
Tool name
Description
EG17650301
(J-33984-A)
Radiator cap tester adapter
G08693776
Adapting radiator cap tester to radiator cap and radiator filler neck
  1. 28 (1.10) dia. 
  2. 31.4 (1.236) dia. 
  3. 41.3 (1.626) dia. 

    Unit: mm (in)

KV10117100
(J-36471-A)
Heated oxygen sensor wrench
G08693777
Loosening or tightening heated oxygen sensors with 22 mm (0.87 in) hexagon nut
KV10114400
(J-38365)
Heated oxygen sensor wrench
G08693778
Loosening or tightening heated oxygen sensors
  1. 22 mm (0.87 in) 
(J-44626)
Air fuel ratio (A/F) sensor wrench
G08693779
Loosening or tightening air fuel ratio (A/F) sensor 1
(J-44321)
Fuel pressure gauge kit
G08693780
Checking fuel pressure
(J-44321-6)
Fuel pressure adapter
G08693781
Connecting fuel pressure gauge to quick connector type fuel lines.
(J-45488)
Quick connector release
G08693782
Remove fuel tube quick connectors in engine room.
(J-23688)
Engine coolant refractometer
G08693783
Checking concentration of ethylene glycol in engine coolant