Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2003 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Navigation System - Diagnostics) >> Panel Switch Does Not Function >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK THE PANEL SWITCH 
    1. Check for foreign matter around the switch that might prevent operation.

      OK: No foreign matter is found. 

    1. NG: REMOVE ANY FOREIGN MATTER FOUND 
    2. OK: GO TO NEXT STEP. 
  2. DISPLAY CHECK MODE (PANEL SWITCH CHECK MODE) 
    1. Enter the "Display Check" mode (Panel Switch Check Mode) (see DISPLAY CHECK MODE (PANEL SWITCH CHECK) ).
    2. Operate the abnormal switch and check if the switch name and status are correctly displayed.

      OK: The switch name and status are correctly displayed as operated. 

      Fig 1: Display Check Mode - Panel Switch Check
      G02909421Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. OK: REPLACE MULTI-DISPLAY (See  REPLACEMENT  ) 
    2. NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE  ) 
scientia non olet · About Mike's Workshop Manuals