Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> Tacoma S-Runner >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems - Diagnostics >> Circuit Inspection >> Door Lock Motor Circuit >> Inspection Procedure

Inspection Procedure

  1. Check door lock motor. See  INSPECTION  . 
    1. NG: Replace faulty door lock motor. 
    2. OK: GO TO NEXT STEP. 
  2. Check for wire harness and connector between door lock motor and body ECU. 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Proceed to next circuit inspection shown in problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
scientia non olet · About Mike's Workshop Manuals