Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> Sienna LE >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System - Diagnostics >> Circuit Inspection >> Actuator Control Cable >> Inspection Procedure

Inspection Procedure

  1. Actuator control cable inspection 

    OK: 

    1. Check that the actuator, control cable throttle link are properly installed and that the cable and link are connected correctly.
    2. Check that the actuator and bell crank are operating smoothly.
    3. Check that the cable is not loose or too tight.

    OK: Freeplay - less than 10 mm 

    NOTE:
    • If the control cable is very loose, the vehicle's loss of speed going uphill will be large.
    • If the control cable is too tight, the idle RPM will become high.
scientia non olet · About Mike's Workshop Manuals