Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Power Door Lock Control Systems - Diagnostics) >> Power Door Lock Control System >> Inspection >> Inspect Driver's Door Lock Motor Operation

Inspect Driver's Door Lock Motor Operation

WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to UNLOCK position.
    Fig 1: Testing Driver's Door Lock Motor
    G01896128Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Reverse the polarity and check that the door lock cable moves to LOCK position.

    If operation is not as specified, replace the door lock motor.

scientia non olet · About Mike's Workshop Manuals