Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> Sienna CE >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems - Diagnostics >> Circuit Inspection >> Manual Door Lock Switch Circuit >> Inspection Procedure

Inspection Procedure

  1. Check Door Lock Control Switch. See Step 1 Or 2 Of  INSPECTION  in POWER DOOR LOCK CONTROL SYSTEM. 
    1. NG: Replace the door lock control switch. 
    2. OK: Go to next step. 
  2. Check Wire Harness And Connector Between Door Lock Control Switch And Body Ground. See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  . 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
scientia non olet · About Mike's Workshop Manuals