Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> Sequoia Limited, 4WD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems - Diagnostics >> Circuit Inspection >> Rear Power Window Switch Circuit >> Inspection Procedure

Inspection Procedure

  1. Check the power window switch  . See step 2  of INSPECTION .
    1. NG  : Replace the power window switch.
    2. OK  : Go to step  2.
  2. Check wire harness and connector between power window switch and Body ECU  . See HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS .
    1. NG  : Repair or replace wire harness or connector.
    2. OK  : Proceed to next circuit inspection shown in problem symptoms. See PROBLEM SYMPTOMS .
scientia non olet · About Mike's Workshop Manuals