Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 374 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Stop Light Switch Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check stop light switch (See  INSPECTION  )  .
    1. OK: Go to next step.
    2. NG: Replace the stop light switch.
  2. Check wire harness and connector between stop light switch and Body ECU, battery and stop light switch  .
    1. OK: Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).
    2. NG: Repair or replace wire harness or connector.
scientia non olet · About Mike's Workshop Manuals