Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 374 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Power Main Relay Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check power main relay (See  INSPECTION  ). 
    1. OK: Go to next step.
    2. NG: Replace the power main relay.
  2. Check wire harness and connector between power main relay and Body ECU, battery and power main relay  .
    1. OK: Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).
    2. NG: Repair or replace wire harness or connector.
scientia non olet · About Mike's Workshop Manuals