Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2002 >> MR2 C56 >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems - Diagnostics >> Circuit Inspection >> Door Unlock Detection Switch Circuit >> Inspection Procedure

Inspection Procedure

  1. Check door unlock detection switch.  See steps 4 and 5 under INSPECTION .
    1. OK: Go to next step.
    2. NG: Replace door unlock detection switch.
  2. Check harness and connector between door unlock detection switch and body ECU. 
    1. OK: Proceed to next circuit inspection shown in PROBLEM SYMPTOMS .
    2. NG: Repair or replace harness or connector.
scientia non olet · About Mike's Workshop Manuals