Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2001 >> Camry CE, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs & Traction Control System -Diagnostics >> Circuit Inspection >> SLIP Indicator Light Circuit >> Inspection Procedure

Inspection Procedure

  1. Check SLIP indicator light. 

    See the combination meter troubleshooting on INSTRUMENT PANELS .

    1. NG: Repair or replace combination meter. 
    2. OK: Go to next step. 
  2. Check for short circuit in harness and connector between ABS & TRAC ECU and SLIP indicator light. 
    1. NG: Repair or replace harness or connector. 
    2. OK: Check and replace ABS & TRAC ECU. 
scientia non olet · About Mike's Workshop Manuals