Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2000 >> Tundra Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Cruise Control System - 4.7L) >> Trouble Shooting >> Cruise Control Function Test >> ACC Position

ACC Position

WARNING: This page is about a different variant/trim than selected.

Turn cruise control main switch on. Drive vehicle to about 25 MPH or greater. Set cruise control switch to RES/ACC position. Release switch. Ensure vehicle speed is increased and stays at new set speed when switch is released. Momentarily move switch lever upward to RES/ACC position, then immediately release it. Vehicle speed should increase approximately one MPH. If vehicle speed does not increase, see SYMPTOM DIAGNOSIS  and perform appropriate test(s).

scientia non olet · About Mike's Workshop Manuals