Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2000 >> Tundra Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System - 3.4L >> Trouble Shooting >> Cruise Control Function Test >> Vehicle Speed Sensor Check

Vehicle Speed Sensor Check

  1. Raise and support vehicle with drive wheels off the ground. Start engine and slowly accelerate to 25 MPH or greater. Turn cruise ON-OFF switch to ON position. If CRUISE control indicator light flashes on and off every .25 second, go to next step. If CRUISE control indicator light does not flash on and off every .25 second, see SYMPTOM DIAGNOSIS  and perform appropriate test(s).
  2. Decrease vehicle speed to 25 MPH or less. If CRUISE control indicator light comes on and stays on, vehicle speed sensor circuit is okay. Go to next step. If CRUISE control indicator light does not come on, see SYMPTOM DIAGNOSIS  and perform appropriate test(s).
  3. Cruise control function test is now complete. No problems are indicated at this time. If cruise control system still does not function properly and no trouble codes are present, see SYMPTOM DIAGNOSIS  and perform appropriate test(s). Problem may also be intermittent.
scientia non olet · About Mike's Workshop Manuals