Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2000 >> MR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Power Mirror Control System) >> Removal & Installation >> Power Mirror Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

Using a flat-blade screwdriver with tape applied to tip, remove heating and ventilation register on left side of instrument panel by prying with screwdriver to release retaining clips. See Fig 1. Disconnect electrical harness connector and separate power mirror switch from register. To install, reverse removal procedure.

Fig 1: Removing Power Mirror Switch
G00124421Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002