Circuit Description
Vapor pressure sensor, canister closed valve VSV and EVAP VSV are used to detect faults in EVAP system. DTC is set if EVAP system leak is detected or vapor pressure sensor malfunctions. Possible causes are:
- Damaged, disconnected or blocked vacuum hose(s).
- Fuel tank cap is installed incorrectly.
- Defective fuel tank cap.
- Damaged fuel tank.
- Defective charcoal canister.
- Vapor pressure sensor circuit is open or shorted.
- Defective vapor pressure sensor.
- Defective fuel tank overfill valve.
- Defective ECM.